Nearly all of the time, companies would spend a lot of money to purchase their lift trucks. It is essential, therefore to take good care of your equipment to protect your investment into the long run. It is a good idea to know the procedures that are undertaken in the care and maintenance of this piece of machine.
Among the best ways to tell how good the engine is working is by starting the forklift up and listening closely to see how it runs. For example, if there are any misses or knocks, the machinery is faulty and this must raise some concerns. Furthermore listen closely for any squealing sounds which come from the belts since these noises would provide you with a lot of information.
When doing maintenance, some of the main components you would need to pay attention to comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to inspect the wiring.
When the above parts have been checked carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every cell of the battery should be checked in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters need to be frequently replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from underneath the equipment. Be sure to grease the axle if there is any grease fitting. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect every other component of the machine like the wheels. If any kind of fault or concern is detected, be certain to deal with it immediately so as to make certain the equipment is running at its safest and optimum levels.