Used Cushion Tire Forklift Connecticut - While forklift trucks are often classified by the type of work they perform under most circumstances, forklift trucks can also be classified by the type of tire they are fitted with. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These types of forklift tires are easier to maintain and less expensive to manufacture. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Forklifts that use cushion tires can be lower to the ground compared to pneumatic tire models and the increase in vertical clearance is welcome for many applications. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires have two categorizations as either solid resilient pneumatic or standard air pneumatic. They are popular for rough terrain applications and uneven surfaces.
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. Solid resilient pneumatic forklifts are a better option in areas that may have objects which could puncture a standard air pneumatic, such as junkyards, lumber yards and the like which may have sharp metal objects.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. Warehousing applications and manufacturing facilities often rely on cushion tire forklifts. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Cushion tire forklifts do not use an internal combustion engine and instead rely on a battery or fuel cell, making them significantly quieter than their propane or diesel cousins.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
Most forklift frames only allow for either a cushion tire or a pneumatic tire. Tires and axles are specific to the lifting capacity and the machine’s frame. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
There are many work applications suitable for using cushion tire forklift models. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
The smaller turning radius on the cushion tire forklifts is one of their main advantages. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Warehouses that utilize a narrow aisle layout will especially benefit from the smaller turning radius of cushion tire forklifts. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Solid pneumatic tires are commonly used in lumber and scrap yards where there are tons of sharp, metal debris including nails. Air pneumatic tires work great outside on gravel and asphalt applications. However, air pneumatic tires are susceptible to being punctured or gouged. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. It takes roughly three days to fill and cure an air pneumatic tire with foam.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. There may be lift limits on certain electric-powered cushion tire models. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. These machines come in different load capacities from under 2000 lbs. to over 200,000 lbs. depending on your application.
Cushion Tire Forklift PDF
